NEWS ARTICLES
Diesel Brewing in the Statesman Journal:
“Diesel Brewing would burn dairy waste and turn it into butanol.
"Butanol is mainly used as a solvent, but company officials want to use it as a renewable fuel.
" If Diesel Brewing succeeds, it likely would be the first company in the world to make butanol with what's called a gasification process, said Andy Aden, a senior research engineer with the biomass center at the National Renewable Energy Lab in Golden, Colo.
"CEO Jeff Raines and his business partners are planning to open a pilot plant in Salem by the end of the year. A location has not been determined.
"The test plant would use one-half ton to one ton of wood and dairy waste per day.
"‘We are hoping for a dual-fuel solution ultimately using a combination of the two wastes,’ Raines said. ‘If for some reason we can't get dairy waste, we can run it on wood waste. ... The focus was to go into a non-food-based liquid fuel, and this gets rid of some...’" Read More
DIESEL BREWING TO HELP OREGON ACHIEVE ENERGY INDEPENDENCE
Company will Convert Renewable Biomass and Manure into Transportation FuelsSalem, Oregon – (Business Wire) – Diesel Brewing announced the company has launched its initiative to manufacture cellulosic bio-butanol from Oregon’s ample supplies of biomass and dairy farm manure. Bio-butanol is a 100% “green” liquid fuel that can be blended into conventional gasoline or diesel stocks without engine modifications. Compared to corn-based fuel additives, bio-butanol has many favorable properties. Bio-butanol burns cleaner, has higher energy content, is substantially less corrosive, and can be transported utilizing existing fuel pipelines and containers.
Butanol is considered “substantially similar” to gasoline for blending purposes and is certified by the U.S. Environmental Protection Agency as an additive agent up to 11%. Tests conducted at Argonne National Laboratory have shown that 20% butanol-diesel blends can be successfully used in engines calibrated for 100% diesel fuel. Results showed that butanol mixed with diesel can reduce harmful vehicle emissions.
“Our program will begin with a demonstration facility built in Salem by the end of 2009 which will process a ton-a-day of biomass”, says Jeff Raines, CEO of Diesel Brewing. “Next, we will build and operate a semi-commercial plant in Eastern Oregon utilizing 10 tons per day (TPD) of non food-based waste products. Our final phase will consist of installing multiple 100 TPD bio-refineries at selected locations throughout the Northwest.”
Oregon annually generates more than 20 million tons of renewable biomass, and produces 2.6 million tons of dairy manure each year. “We don’t want to merely make electric power from these waste products,” explains Raines. “Instead, we are seeking a more comprehensive solution, one that will produce multiple clean energy products generated from problematic feedstock materials. These products will be produced and consumed in the same community, creating a sustainable energy model.”
The Diesel Brewing biomass to liquid fuel technologies is capable of generating more than just bio-butanol as a “next generation” fuel. Diesel Brewing’s cellulosic process starts with a gasifier that transforms wood wastes, agricultural residues and manure into a hydrogen rich mixture. This synthesis gas is cleaned and fed into a catalytic reactor and purification system to generate a suite of alcohols containing butanol, ethanol and methanol. “By changing the conversion chemistry, we could produce a number of desirable energy products including biodiesel and Dimethyl Ether (propane) as renewable fuels or Anhydrous Ammonia for the production of fertilizer.” Raines explains. “For now, we’ll focus on the production of bio-butanol.”
Diesel Brewing has engaged Unitel Technologies based in Mt. Prospect, Illinois, and Dr. Kevin Witty, Associate Professor at the Institute of Clean and Secure Energy located in Salt Lake City, Utah as its primary technical program advisors. Pressure vessel and refractory specialists, C H Murphy Clark-Ullman Inc., based in Portland, Oregon, has agreed to work with Diesel Brewing for the fabrication and installation of multiple specialized pressurized vessels.
Contact:
Mark Stapleton
President
Tel: 503-588-8580
Mark@dieselbrewing.com